川禾-新闻

2020.11.02

Metallographic analysis is generally performed on cross-sections for microscopic observation. After cutting, most samples are irregular in shape, which is inconvenient to clamp and grind, so most of the cut samples need to be inlaid into a standard size.

查看详情

Hot Mounting Resin Types and Selection Guide

2020.11.02

Metallographic analysis is generally performed on cross-sections for microscopic observation. Most of the samples after cutting are irregular in shape, which is inconvenient to clamp and grind, so most of the cut samples need to be inlaid into a standard size. Inlay is actually to fill and cover the cut sample with liquid resin in a fixed membrane cavity. After the liquid resin is solidified, it is demolded to form a standard-shaped inlaid sample.

查看详情

How to choose a metallographic mounting machine?

2020.11.02

热镶嵌是将树脂颗粒，填埋入模具内，加热至液态，在加压后紧密包覆样品，固化后脱模。热镶嵌多用于耐热耐压的固体材料。热镶嵌快速简单，样品致密标准，所以大多数金属材料采用热镶嵌的方式来制样。

查看详情

The secret of quick and effective sample mounting is just that simple!

2023.03.02 2100

查看详情
How to choose a metallographic mounting machine?

热镶嵌是将树脂颗粒，填埋入模具内，加热至液态，在加压后紧密包覆样品，固化后脱模。热镶嵌多用于耐热耐压的固体材料。热镶嵌快速简单，样品致密标准，所以大多数金属材料采用热镶嵌的方式来制样。

2020.11.02 4512

查看详情
Hot Mounting Resin Types and Selection Guide

Metallographic analysis is generally performed on cross-sections for microscopic observation. Most of the samples after cutting are irregular in shape, which is inconvenient to clamp and grind, so most of the cut samples need to be inlaid into a standard size. Inlay is actually to fill and cover the cut sample with liquid resin in a fixed membrane cavity. After the liquid resin is solidified, it is demolded to form a standard-shaped inlaid sample.

2020.11.02 5909

查看详情
热镶嵌机的类型

热镶嵌是将树脂颗粒，填埋入模具内，加热至液态，在加压后紧密包覆样品，固化后脱模。热镶嵌多用于耐热耐压的固体材料。热镶嵌快速简单，样品致密标准，所以大多数金属材料采用热镶嵌的方式来制样。市面上的设备林林总总，价格也从1000多元到二十万出头不等。热镶嵌树脂在加热后会软化，但是渗透性不好，需要外加压力来强制实现树脂渗透和致密化。

2020.11.02 2350

查看详情
The Importance of Mounting Machines

Metallographic analysis is generally performed by microscopic observation of the cross section. Most of the samples after cutting are irregular in shape, which is inconvenient to clamp and grind, so most of the cut samples need to be inlaid into a standard size.

2020.11.02 2028

查看详情
Cold Mounting Resins Selection Guide

Metallographic analysis is generally performed on cross-sections for microscopic observation. After cutting, most samples are irregular in shape, which is inconvenient to clamp and grind, so most of the cut samples need to be inlaid into a standard size.

2020.11.02 9459

查看详情
金相热镶嵌的常见问题

热镶嵌是将树脂颗粒，填埋入模具内，加热至液态，在加压后紧密包覆样品，固化后脱模。热镶嵌多用于耐热耐压的固体材料。热镶嵌快速简单，样品致密标准，所以大多数金属材料采用热镶嵌的方式来制样。

2020.11.02 5307

查看详情

Q&A