精密切割机|高速精密切割机|低速精密切割机|金相切割机-ExactCut-10/20精密切割机

ExactCut-10/20 Precision cutting machine 简介

Large cutting chamber，maximum cutting diameter can be 70mm，square sample can be 165*50mm

Best motor，rotation speed is 300~5000rpm，meeting the variable speed precise cutting of all kinds materials.

A variety of fixtures to meet the cutting of samples of various shapes and sizes

The cutting disc diameter is optional from 75 to 203mm and the minimum cutting gap can be 0.3mm

The cutting disc can be adjusted within a range of 40mm，which can maximize the use of the wear of the cutting disc.

ExactCut-10/20 (abbreviated as "E-10/E-20") is a precision cutting machine that can accurately cut small and medium-sized samples. It can cut most materials such as metals, ceramics, composite materials, electronic components, minerals, crystals, etc. It is flexible and easy to use. It is greatly saving the cost of consumables by the operating lever of the workpiece can be positioned and the height of the cutting disc can be adjusted up and down.It is not only suitable for a variety of different fixtures, but also allows to use even if the outer diameter of the cutting to be worn from 203mm to 75mm/100mm.

咨询热线 400 099 7576

加入收藏

Large cutting chamber for different sizes and shapes

Compared with the same type of precision cutting machines, it has a spacious cutting room and a wide workbench (258x184mm).

It has the ability to cut large workpieces.The maximum cutting diameter is 70mm and a square sample with a size of 165x50mm.

The cutting table is designed with an 8mm T-slot, which can flexibly clamp different fixtures. One precision cutting machine can achieve precision cutting of most materials and samples of different sizes and shapes.

Abundant and flexible fixtures

8mm T-slot equipped with flexible and diverse clamps. There is always a clamp that can meet your high-precision cutting needs.

Provide a wide variety of clamps and clamp seats to firmly clamp the workpiece.

Automatic X table with batch cutting

The automatic X table is an option for batch cutting.

The total stroke of batch cutting can move 40mm.It can realize three batch modes: equidistant cutting, non-equidistant cutting and knife cutting.

The automatic X table ensures the accuracy of the cutting length.

Intuitive interface in APP-style, custom method saving

The cross-operating lever plus the 10-inch touch screen, with a simple and easy-to-use control interface, makes it very easy for the operator to get started.

The parameter settings are intuitive and easy to understand, and about 40+ cutting methods can be saved.