Fast mounting to save time

Automatic feeding with silent technology

Easy to operate with large touch screen

Powerful heating，strong pressure，fully soaking and holding samples

Penetration-60 (P-60 for short) is a highly adaptable hot mounter. With fast mounting speed and superior sample infiltration protection, the mounting quality and production capacity are doubled. The high adaptability of the equipment can meet the needs of different diameters, different resin powders, and different cooling methods. The equipment has three unique skills: strong heating, surging pressurization, and extremely fast cooling, which can compress the mounting process time within 5 minutes. The appearance is sharp and angular, rigid but round which was designed by the master designer. It is a combination of square and round, low-key but elegant.

Excellent heating and cooling performance

Top pressurization system

Water cooling system with two-level cooling

Convenient and fast by one-button operation

Penetration-30 is a fully automatic single-station metallographic sample mounting machine that is suitable for hot mounting materials such as thermosetting and thermoplastic materials. The cooling method is water cooling, which cools quickly; the entire mounting process is programmed and automatically controlled without test personnel are required to be on duty.

Easy to quickly master the sample preparation process

Semi-automatic setting，high-efficient sample preparation

Configured with digital display temperature controller

Configured with timer

MSQ-30 is a mechanical mounting machine. The hand wheel outside the machine body is rotated.The screw rod inside the machine body is driven by a pair of bevel gears to make the lower mold of the pressed sample move up and down in the steel mold sleeve. The thermogenic plastic and the mounted sample are formed under heating conditions.

Excellent impregnation performance

Quick and efficient operation

Greatly shortened mounting time

Especially suitable for porous materials

VacFill-9 is a vacuum cold mounting machine for metallographic samples by providing excellent impregnation performance and fast and efficient operation. It is particularly suitable for porous materials such as crack failure analysis samples, porous castings and composites, electronic components, ores, ceramics and spraying specimens and etc.

Fast-curing resin

Good resin protection

High-quality test samples can be obtained

Especially for transparent mounting materials

TECHNOMAT vacuum pressure cooker is a special equipment developed especially for fast-curing polymer resins. The 2 bar working pressure is determined according to the characteristics of TECHNOMAT self-curing resins. It is suitable for pressure polymerization treatment of mounting or impression materials in material testing (profile grinding and surface impression testing).