TRUER cold mounting set is suitable for mounting heat-sensitive and pressure-sensitive materials, and also is suitable for batch mounting.

Truer cold mounting resin system has the following obvious characteristics through special component modulation and matching.

1、Good fluidity

The resin has low viscosity and good penetration wettability. It can quickly penetrate into the pores, cracks or depressions of the sample during pouring, reduce "air pockets", firmly hold the sample, and the coating material and sample interface are well bonded.

2、Low shrinkage

The resin has low viscosity and good penetration wettability. It can quickly penetrate into the pores, cracks or depressions of the sample during pouring, reduce "air pockets", firmly hold the sample, and the coating material and sample interface are well bonded.

Truer developed all series of Truer cold mounting resins,which fully cover various application requirements with fast curing, high hardness, low shrinkage, no bubbles, and full transparency.

TRUER cold mounting resin sets are available in two types: epoxy and acrylic. The epoxy cold mounting set has low shrinkage and safe and environmentally friendly performance. The acrylic cold mounting set has a very fast curing speed to meet the needs of rapid inspection.

TRUER cold mounting set are all binary sets which can be poured into the mold to complete the curing after the two components are mixed in proportion. It is easy to use, fast and economical.

The EXTRANS high-transparency vacuum impregnation cold mounting set promoted by Truer is the most competitive transparent cold mounting resin on the market. The resin has strong penetration and can quickly penetrate into the gaps on the surface of the sample, thereby providing strong support and protection for the sample. It is suitable for vacuum impregnation mounting of porous samples and plasma spray coatings.

It works perfectly with the VacFill-9 multi-station vacuum cold mounting machine produced by Truer