Cutting is to cut the original sample to obtain the most representative target analysis surface. Cutting is essentially the process of removing the slit material, and this material removal process is completed by the cutting blade. The cutting blade rotates at high speed, causing the hard abrasive particles protruding on the surface to impact the sample, and the target sample is cut in a self-loss manner.

A small saw blade contains a lot of knowledge. Let's start with the process steps of the saw blade:

1. Mix the abrasive grains with the molding resin powder.

2.  Spread the mixed powder evenly into the mold cavity.

3. Hot press the powder and remove the mold after the resin is solidified.

High-quality cutting blades will make the cutting process feel light and the cutting surface is even and flat, while also ensuring a longer life for the saw blade. It is not easy to balance these three points. According to the special requirements of metallographic cutting conditions, Truer Company carefully selects superior abrasive particles, optimizes the particle size distribution of abrasive particles, uses high-binding resin powder, repeatedly optimizes the molding process parameters, and develops a special saw blade suitable for metallographic cutting.

It is always right to leave professional matters to professional companies. Truer Company is deeply engaged in the metallographic industry and focuses on all aspects of metallographic sample preparation. If you have any troubles in metallographic sample preparation, you may wish to consult the professional metallographic technicians of Shanghai Truer Company, or entrust them to prepare samples. Truer Company has more than ten years of comparative analysis experience and has handled thousands of difficult cases. I believe it will be helpful to you.

As a professional metallographic solution provider in China, Shanghai Truer Industrial Development Co., Ltd. takes international giants as benchmarks, faces difficulties, concentrates on research, and overcomes key equipment and consumables that restrict the development of the industry, creating a complete metallographic industry chain integrating equipment, consumables and sample preparation training; the company is equipped with a cutting-edge metallographic laboratory and has a team of highly qualified experts. It has provided metallographic analysis and sample preparation training services to thousands of customers for more than ten years, and provides customized metallographic laboratory solutions.